Printronix
Engineers
Pvt. Ltd.
   Home
 

About Us

 

Products

 

Services

 

Clients

 

Contact Us

   

 

 
Electronic Products
 

PRODUCT INFORMATION PI 011


Level Sensing Probes For Conducting Liquids

The selection of a suitable probe design from the following list is based on the shape and dimensions of the container, the characteristics of the material inside the container and environmental conditions, viz., pressure temperature, chemical composition etc.

 

WELL PROBE TYPE DIP 201

The cylindrical plastic encapsulated well probe consists of a stainless steel tip with flexible lead wire of desired length. The probe may be hanged inside the container or may be mounted vertically on the container wall with the help of suitable brackets etc. The lead wire is terminated into an aluminum housing shown in Fig.1

  • 1  BSP threaded aluminium probe head

  • Body  - 25mm X 160mm

  • Electrode Tip Stainless Steel 4 mm dia.

  • Max. Operating Temp.-  70

ROD PROBE TYPE DIP 202

The threaded aluminium probe head holds insulated probe rod with stainless steel tip. Suitable for vertical mounting on the container top.

  • 1 BSP threaded aluminium probe head

  • Electrode Tip Stainless Steel 4 mm dia.

  • Max. Operating Temp.-  70

  • Available upto a probe length of 2000mm.

ECONOMY WELL PROBE TYPE DIP 203 & DIP 204

The cylindrical plastic encapsulated well probe consists of a stainless steel tip with flexible lead wire of 2 m length. The probe may be hanged inside the container of in case of DIP 204 the same can be mounted vertically on the container wall with the help of suitable bracket.

  • Body                            -  18mm dia X 100mm

  • Electrode Tip                -  Stainless Steel 4 mm dia

  • Max. Operating Temp. -  70

ROD PROBE TYPE DIP 205 FOR 2-POINT CONTROL

The threaded aluminium probe head holds two number insulated probe rods with stainless steel tip. Suitable for mounting on container top.

  • 2 BSP threaded aluminuim probe head. 

  • Electrode Tip              -  Stainless Steel 4 mm dia

  • Max. Operating Temp.-  70

  • Available upto probe lengths of 2000mm

HIGH PRESSURE ROD PROBE TYPE          DIP 206

A High pressure plug mounted probe with PTFE / Nylon insulation is held by 1 BSP threaded gun-metal probe head with aluminum housing. Suitable for mounting on high-pressure containers

  • Probe Head 1 BSP threaded gun metal with Aluimium housing.

  • Electrode Tip           -  Stainless Steel 4 mm dia

  • Max. operating temperature

  • 150C with PTFE insulation

  • 70C with nylon insulation.

  • Max. Operating Pressure  -  20 kg / sq. cm.

  • Available upto a probe length of 1500mm.

THREE-IN-ONE PRESSURE ROD PROBE ASSEMBLY TYPE DIP 207

Three high pressure plug mounted probes with PTFE / Nylon insulation held on single gun-metal probe head suitable for mounting on high pressure containers.

  • Probe Head 2 BSP threaded gunmetal with Aluminium Housing.

  • Electrode Tip -  Stainless Steel 4 mm dia

  • Max. operating temperature

  • 150C with teflon insulation

  • 70C with      nylon insulation.

  • Max. Operating Pressure  -  20 kg / sq. cm.

  • Available upto a probe length of 1500mm