Printronix
Engineers
Pvt. Ltd.
   Home
 

About Us

 

Products

 

Services

 

Clients

 

Contact Us

   

 

 

Sport Shooting Targets

 

# TARGETS FOR AIR RIFLE AND AIR PISTOL SHOOTING ON 10 METER RANGE 

# TARGETS FOR PISTOL SHOOTING ON 25 METER RANGE

# TARGETS FOR PISTOL AND RIFLE SHOOTING 50 METER RANGE 

# TARGETS FOR CARBINE SHOOTING FOR AIPDM ON 50 METER / 25 METER RANGE

 

 

AUTOMATIC MOVING TARGET CARRIER & CONTROL

SERIES FBTC 3000

FOR 10 METER RANGE

The Electronic Automatic Moving Target Carrier & Control Type FBTC 3000 are specially designed to substitute for similar imported equipment used in 10m ranges of Olympic air-pistol and air rifle shooting competitions and training.

FBTC 3000 comprises of target carrier mounted on nylon rope, which is passed around two pulleys. The pulley at the butt-end is a dummy while the other, mounted on the control box, is the drive pulley. The control box, which is to be mounted at the shooter’s end at a suitable height, comprises of a reversing motor coupled to the drive pulley. The target carrier can be moved forward or backward by simply pressing a push-button fitted on the top of the control box, The target carrier automatically stops when the same reaches the destination, butt-end or shooter’s end.

The set consists of the following components :    -

  • Main Control Unit                     FBTC 3001

  • Moving Target Carrier             FBTC 3002

  • Butt End Assembly                  FBTC 3003

  • Bullet Catcher                          FBTC 3004

  • Lamp Fixture                           FBTC 3005

  • Guide Rope – 25m

  • Driving Rope – 25m

SPECIFICATIONS

  • Power Supply             : 230V, 50Hz

  • Power Consumption    : 80W approx.

  • Target speed               : 2.5 m/sec±10%

FEATURES

  • Robust Design

  • Attractive

  • Strong Drive Motor

  • Easy to install and dismantle

  • Single Mushroom Push-button for forward as well as reverse movement..

 


 

PROGRAMMABLE TURNING TARGET RANGE EQUIPMENT

SERIES PSTC 1000

FOR PISTOL SHOOTING PRACTICES

The electronically controlled Pistol Shooting Range of PSTC 1000 series by PRINTRONIX, is an import substitute for the similar equipment used for Olympic and other international shooting competitions and training. These targets are useful for Rapid Fire, Centre Pistol, Standard Pistol & other matches.

The set comprise of the following units: -

1 TURNING TARGET MAIN FRAME TYPE PSTC 1001
Turning Target Main Frame Type PSTC 1001 comprises of five number turning targets, linked with single reversible drive mechanism, operative due to a 3-Phase geared motor with brake. The complete unit is fabricated out of M.S.   / Aluminium sections and painted with weatherproof polyurethane paint.
ELECTRICAL CONTROL UNIT TYPE PSTC 1011
The Electrical Control Unit Type PSTC 1011 is capable of controlling the forward and reverse rotation of the drive motor. It comprises of various switch gear and control gear components along with necessary protection against short circuit, Overload and reversed phase sequence. Plugs and sockets are provided in the PSTC 1011 for mains supply connection and for connection of the Time Control Unit Type PSTC 1002.

2 ELECTRONIC TIME CONTROL UNIT TYPE PSTC 1002
The Electronic Time Control Unit Type PSTC 1002 is a portable instrument which generates various control signals for Reversing Starter so that the five targets could be turned as per the programmed selected.

The Time Control Unit provides the following in its front panel: -

  • ON / OFF Switch

  • Mains Supply Indicating Lamp

  • ‘TOGGLE’ push-button for manually making the target appear or disappear

  • ‘START’ push-button for starting the programmed sequence

  • ‘STOP’ push-button for stopping the programmed sequence

  • Thumb wheel switch to set time of visibility of target

  • Thumb wheel switch to set time of forward run before the target gets visible

  • Programme Selector Switch

  • Socket adopter for plug connection to the Target Main Frame

  • Socket adopter for plug connection to a hand-held remote control push-button station.

Following sequences could be selected: -

  • Duel Shooting Mode – in this mode the target remains out for 7 seconds and appears for 3 seconds and repeats this cycle 5 times then stops.

  • 8-6-4 Mode – in these modes when the instructor presses the ‘START’ button the target appears after 3 seconds and then disappears after 8/6/4 seconds.

  • 10-20-50 Mode – in these modes when the instructor presses the ‘START’ the target appears after 7 seconds and disappears after 10/20/50 seconds.

  • X1-X5 Mode – in these modes the target appears after the ‘Visible Time’ set on one set of two thumb wheel switches and stays for the ‘Forward Run Time’ set on another set of two thumb wheel switches and repeats 1/5 times.

  • The STOP button can stop any function.

HAND HELD REMOTE CONTROL PUSH-BUTTON STATION TYPE PSTC 1012

The Remote Control Unit Type PSTC 1012 is available with 5m long cable and a plug for connection into the Time Control Unit PSTC 1002 for controlling the START / STOP / TOGGLE functions from a distance.
 

ACCESSORIES FOR USE WITH SINGLE TARGET (SMALL RANGE APPLICATION)

Cable with plugs for connection between the Time Control Unit and the Target Main Frame.

  • 30m CABLE          TYPE  PSTC 1302

  • 40m CABLE          TYPE  PSTC 1402

Flexible 5-Core cable with plug for mains supply connection to PSTC 1011

  • 10m CABLE          TYPE PSTC 1101

  • 20m CABLE          TYPE PSTC 1201

ACCESSORIES FOR USE WITH MULTIPLE TARGETS (LARGE RANGE APPLICATION)

In large ranges developed for competitions the number of targets is more. For most of the competitions it becomes necessary to control all the targets simultaneously. For this purpose special Junction Boxes are to be fitted at the range behind each target and near each Timer unit. These junction boxes are interconnected at the target end as well as at the shooters’ end. With this arrangement only one Timer Unit will be able to simultaneously control all or selected Targets. For individual practices it will be possible to control individual targets with corresponding timer unit. For each set of Target following additional equipment will be required: -

  • POWER DISTIBUTION BOX TYPE PSTC 1051 for distributing power to all the targets as also for transferring the control signal to them.  

  • SHOOTER END MASTER JUNCTION BOX TYPE PSTC 1052 for the ‘MASTER’ timer which will be able to control all the selected targets simultaneously.  

  • MULTIPLEX TARGET-END JUNCTION BOX TYPE PSTC 1021 one for each target with plugs, sockets and cables for connection.  

  • MULTIPLEX SHOOTER-END JUNCTION BOX TYPE PSTC 1022 one for each of the remaining timer units apart from the ‘MASTER’ with plugs, sockets and cables for connection.

SPECIFICATIONS:

  • POWER SUPPLY                     :               415± 10%, 50Hz., 3-Phase 4-Wire Supply

  • POWER CONSUMPTION          :               400 Watts approximately.

  • MOTOR                                    :               0.37KW geared Brake Motor, 60rpm

  • TIME ACCURACY                    :               Crystal with LSI  I.C. used      

 


 

 

TARGET FRAME MECHANISM

SERIES RFTC 5000

FOR 50 METER RIFLE SHOOTING PRACTICES

PRINTRONIX make Target Frame Mechanisms Of Series RFTC 5000 are designed specially for application with 50 m ranges used for Precision Rifle Shooting Practices. These mechanisms are available in manual version as well as in electrical versions. The mechanisms are simple but effective. The targets are painted with epoxy paint and thus these are weather protected. While the manual machines use conventional target sheets for the electrical machines special rolls of target sheets are required.

FEATURES:

  • Robust Design

  •  Epoxy Coated

  •  Easy to install and dismantle

  •  Smooth operation

MANUAL TARGET FRAME MECAHNISM                     TYPE RFTC 5100

The Manual Target Frame Mechanism Type RFTC 5100 is made out of aluminium frames supported by rigid steel structure to provide trouble free movement of the target sheets at the butt end. There are two frames for holding the target sheets. If one frame is pulled down for changing the sheet / checking the record the other frame automatically goes up. The complete operation can be carried out by a man sitting inside the trench at the butt end.

ELECTRICAL TARGET FRAME MECHANISM           TYPE RFTC 5200

The Electrical Target Frame Mechanism Type RFTC 5200 comprises of a roll of target sheets, which moves with the help of rollers and small a.c. motor to present the sheet in front of the shooter. The control is in the hands of the shooter and he can adjust the position of the target sheet for proper alignment. The shooter can also bring the next sheet within the frame after firing on the previous one. The sheets get collected at the bottom of the machine and at the end of firing these can be taken out for scoring. The push button station at the shooter’s end is simple and portable as per the convenience of the shooter. 

SPECIFICATIONS:

  • POWER SUPPLY                     :  230V± 10%, 50 HZ., Single Phase, Mains Supply

  • POWER CONSUMPTION          :  200 Watts approximately

  • CONTROL CABLE LENGTH     :  60 Meters

  • MOTOR                                    :  Single Phase reversible motor, 60W.

 

4. ELECTRICAL TARGET FRAME MECHANISM 
TYPE RFTC 5300

The Electrical Target Frame Mechanism Type RFTC 5300 is suitable for rifle as well as for pistol shooting practices both. The machine comprises of a mounting frame structure which is fixed to the rear wall of the butt end trench. The target frame slides up and down on this structure. The target frame comprises of a roll of target sheets (only for rifle shooting practices), which moves with the help of rollers and small a.c. motor to present the sheet in front of the shooter. The control is in the hands of the shooter and he can adjust the position of the target sheet for proper alignment. The shooter can also bring the next sheet within the frame after firing on the previous one. The sheets get collected at the bottom of the machine and at the end of firing these can be taken out for scoring. The push button station at the shooter’s end is simple and portable as per the convenience of the shooter. For pistol shooting an extra steel sheet, which was inserted for the rifle shooting practice, has to be removed. The frame thus becomes capable of handling the target sheet for pistol. In this condition the frame has to be manually brought down to change the sheet.  

SPECIFICATIONS:

  • POWER SUPPLY                     :  230V± 10%, 50 HZ., Single Phase, Mains Supply

  • POWER CONSUMPTION          :  200 Watts approximately

  • CONTROL CABLE LENGTH     :  60 Meters

  • MOTOR                                    :  Single Phase reversible motor, 60W.


 

 

PROGRAMMABLE TURNING TARGET RANGE EQUIPMENT

SERIES PDM 4000 PI 013/ 01

PISTOL / REVOLVER SHOOTING RANGE TYPE PDM 4100 FOR APPLICATION IN AIPDM

The electronically controlled Turning Targets type PDM 4100 is suitable for the practices and competitions for the Revolver / Pistol Shooting match No. 1 – 4 of All India Police Duty Meet. The complete set comprises of the following units.

TURNING TARGET UNIT TYPE PDM 4101

The Turning Target Unit Type PDM 4101 comprises of three number turning frames, each specially designed to hold thermocol base of 500 mm Width and 1350 mm Height for the human figure sheet (Fig Target No. 2) required for such competitions. All the three turning mechanisms are linked with a single reversible drive mechanism, operative due to a geared motor with brake. The complete unit is fabricated out of M.S. Sections and painted with weather proof polyurethane paint.

BUTT END CONTROL TYPE PDM 4102

The Butt End Control Unit Type PDM 4102 supplies 3-Phase power to up to 4 No. PDM 4101. Thus a set of a maximum 12 targets can be formed. All the connections between PDM 4102 and the individual target units are through plug-in cables.

PROGRAMMABLE CONTROL & TIMING UNIT

The Programmable Control & Timing Unit Type PDM 4103 is a portable control desk which can be installed at a suitable distance behind the shooter form where the match in charge can control the targets & issue the commands. The control desk comprises of various controls and programme switches for selection of different practices as follows: ­

WEAPON       :               REVOLVER / PISTOL            

 

MATCH No.

DISTANCE

(YARDS)

 

DESCRIPTION

TIME

(SEC.)

PROCEDURE /

POSITION

1

15

Application 15 Yards.

5

Squatting Position

2

15

 Rapid Firing

8

Battle Crouch Position

3

30

  Attack

12

Standing Position / Line up at 50 m run and fire from 30 m.

4

50

Quick Firing

4 + 6

Lying Position

 

THERMOCOL BASE FOR TARGET SHEETS

The Thermocol base designed to hold the human figure required for AIPDM matches has the dimensions as shown in the enclosed drawing which also suggest the dimensions of the trench at the butt end which will give a target height as per standard

 

SPECIFICATIONS

  • POWER SUPPLY              :  3-Phase 4-Wire 415V± 10%  50Hz. Mains

  • POWER CONSUMPTION   :  Approximately 400VA per set of  3 targets. (1 No. PDM 4100)

  • TIMING CONTROL    : By means of latest CMOS Logic ensuring accuracy of timing with quartz oscillator.

  • CENTRE TO CENTRE DISTANCE BETWEEN TARGETS:  1.5 Meter

FEATURES

  • Robust Steel Frame

  • Lightweight geared motor in aluminium housing suitable for smooth & snappy action.

  • Vibration Free Turning

  • Polyurethane Paint

  • Weather-Proof outdoor type construction

  • Plug-in connections to ensure easy installation.

  • For AIPDM application simply select the match , the timing is internally  programmed


 

CARBINE SHOOTING RANGE TYPE PDM 4200

FOR APPLICATION IN AIPDM

The electronically controlled Turning Targets type PDM 4200 is suitable for the practices and competitions for the Carbine Shooting match of All India Police Duty Meet. The complete set comprises of the following units.

 

TURNING TARGET UNIT TYPE PDM 4201

The Turning Target Unit Type PDM 4201 comprises of four number turning frames, each specially designed to hold thermocol base of 500 mm Width and 1350 mm Height for the human figure sheet required for such competitions. All the four turning mechanisms are linked with a single reversible drive mechanism, operative due to a geared motor with brake. The complete unit is fabricated out of M.S. Sections and painted with weather proof polyurethane paint.

BUTT END CONTROL TYPE PDM 4202

The Butt End Control Unit Type PDM 4202 supplies 3-Phase power to up to 4 No. PDM 4201. Thus a set of a maximum 16 targets can be formed. All the connections between PDM 4202 and the individual target units are through plug-in cables.

PROGRAMMABLE CONTROL & TIMING UNIT

The Programmable Control & Timing Unit Type PDM 4103 is a portable control desk which can be installed at a suitable distance behind the shooter form where the match in charge can control the targets & issue the commands. The control desk comprises of various controls and programme switches for selection of different practices as follows: ­

WEAPON       :               CARBINE / STEN GUN

 

MATCH No.

DISTANCE

(YARDS)

 

DESCRIPTION

TIME

(SEC.)

PROCEDURE /

POSITION

1

50

Unsupported aimed

8

Standing Position

2

25

Burst Firing

8

Battle Crouch Position

3

20

Burst Firing

8

Battle Crouch Position

 

THERMOCOL BASE FOR TARGET SHEETS

The Thermocol base designed to hold the human figure required for AIPDM matches has the dimensions as shown in the enclosed drawing which also suggest the dimensions of the trench at the butt end which will give a target height as per standard

SPECIFICATIONS

  • POWER SUPPLY                 :  3-Phase 4-Wire 415V± 10%  50Hz. Mains

  • POWER CONSUMPTION      :  Approximately 500VA per set of  4 targets. (1 No. PDM 4200)

  • TIMING CONTRO L  : By means of latest CMOS Logic ensuring accuracy of timing with quartz oscillator.

  • CENTRE TO CENTRE DISTANCE BETWEEN TARGETS:  1.5 Meter

FEATURES

  • Robust Steel Frame

  • Lightweight geared motor in aluminium housing suitable for smooth & snappy action.

  • Vibration Free Turning

  • Polyurethane Paint

  • Weather-Proof outdoor type construction

  • Plug-in connections to ensure easy installation.

  • For AIPDM application simply select the match , the timing is internally programmed


 

PISTOL/REVOLVER SHOOTING RANGE TYPE PDM 4200

FOR APPLICATION IN AIPDM AS WELL AS FOR COMBAT PRACTICE

The Turning Targets of Combat Shooting Practice (Type TUT 2003) can also be used for the pistol / revolver matches of All India Police Duty Meet if a suitable Programmable Central Control Unit is used. Depending upon requirement, a set of 4, 8 or 12 targets can be arranged in a row. The PCCU is specially designed for the timings of Match No. 1- 4 of All India Police Duty Meet. It has also the provision to control the targets for different timings, other than AIPDM. It is also possible to bring the targets into RANDOM OPERATION MODE. The advantage of this range over our series PDM 4000 is that each target is driven by individual motor and is complete in itself. Thus more flexibility in the system layout is achieved and in case of mechanical failure only one target is to be removed form the practice. These targets can also be used for combat shooting practices in addition to AIPDM practices. The complete set comprises of the following units: -
 

TURNING TARGET UNIT TYPE TUT 2003

The Turning Target Unit type TUT 2003 takes 90° turn from its REST position to present a full view to the shooter when a suitable control signal is given to the same. In the REST state the target mounted on the mechanism takes an EDGE ON position i.e. only the edge of the target is visible to the shooter. The target is designed to either hold the Thermocol Base of  500 mm width and 1350 mm height for the human figure sheet ( Fig. No. 2 ) required for AIPDM or hold the normal Combat Shooting figure  11 targets . The complete unit with its mechanical gear and electrical control is made out of  M.S. Sections and sheets enclosed in whether proof  housing.
 

LOCAL CONTROL UNIT TYPE  LCU 4273

The Local Control Unit type LCU 4273 is designed to control maximum four number turning targets of type TUT 2003. Depending upon the requirement 1, 2, or 3 No. LCU 2073 can be used for controlling the targets. The LCU units are to be mounted at the Butt End with cable connections for receiving 3-phase power supply and plug-in connections for supplying power and control signal to the targets.
 

PROGRAMMABLE CENTRAL CONTROL TYPE  PCCU 4262/4263

The Programmable Central Control Unit Type PCCU 4262 / 4263 is a portable control desk which can be installed at a suitable distance behind the shooters from where the match incharge can control the targets & issue the commands. The control desk comprises of various controls and programme switches for selection of different practices as follows : -

WEAPON       :               REVOLVER / PISTOL            

MATCH No.

DISTANCE

( YARDS )

DESCRIPTION

TIME

( SEC. )

PROCEDURE /

POSITION

1

15

Application 15 Yds.

5

Squatting Position

 2

 15

 Rapid Firing

 8

Battle Crouch Position

 3

 30

 Attack

 12

Standing Position / Line up at 50 Mtrs run and fire from 30 Mtrs.

4

50

Quick Firing

4 + 6

Lying Position

 

The controls are also provided for simultaneous operations of all the connected targets with programmable timings, as also for random operations to generate element of surprise. There is also provision of dividing the targets into different zones in which the targets will be active one-by-one zone -vise. Thus more variations in the operation of the targets are possible for combat  shooting practices.
 

POWER DISTRIBUTION PANEL TYPE  PDP 2080

The Power Distribution Panel type PDP 2080 supplies electrical power to all the LCUs. A single PDP 2080 can be used to supply power to maximum 4 No. LCUs.
 

THERMOCOL BASE FOR TARGET SHEETS

The Thermocol base designed to hold the human figure required for AIPDM matches has the dimensions as shown in the enclosed drawing which also suggest the dimensions of the trench at the butt end which will give a target height as per the standard requirement.

 

SPECIFICATIONS

  • POWER SUPPLY                     :  3-Phase 4-Wire 415V± 10%  50Hz. Mains

  • POWER CONSUMPTION          : Approximately 300VA per target.

  • TIMING CONTROL  : By means of latest CMOS Logic ensuring accuracy of timing with quartz oscillator. 

  • CENTRE TO CENTRE  DISTANCE BETWEEN TARGETS           : Adjustable.

FEATURES

  • Robust Steel Frame

  • Light weight geared motor in aluminium housing suitable for smooth & snappy action.

  • Vibration Free Turning

  • Weather-Proof  outdoor type construction

  • Plug-in connections to ensure easy installation.

  • For AIPDM application simply select the match , the timing is internally  programmed

  • Suitable for Combat Shooting Practices and Quick Action Practices also.

  • Flexibility in range layout.

  • Portable Targets   - easy to shift.


 

MOTORIZED 4 X 4 TARGET MECHANISMS OF TYPE 4300

FOR RIFLE SHOOTING PRACTICES

INTRODUCTION:

PRINTRONIX make 4 x 4 Mechanism for movement of targets for Rifle Shooting Practices are fabricated out of steel structure and are for installation      inside a trench at the butt end. These mechanisms have two frames which move up/down. While the front frame moves up the rear frame moves down and           vice-versa. The frames are designed to hold 4’x 4’ targets used for Rifle Shooting Practices. The movement of the frames is due to a three-phase geared brake motor. This facilitates the operation of the targets from a remote location. The targets are controlled with the help of a Control Desk which generates suitable commands for UP/DOWN operations. A complete set of the targets comprises of the following items.

EQUIPMENT:

  • Motorized 4 x 4 Target Mechanisms type RSTM 4301 capable of moving two number 4 x 4 Targets up and down with provision for variable lighting for night firing.

  • Local Control Unit type LCU 4302 for controlling each target.

  • Central Control Unit type CCU 4303 in the form of Control Desk to be kept at shooters’ end, capable of controlling the UP/DOWN motion of maximum     16 No. Target mechanisms type RSTM 4301.

  • Power Distribution Panel type PDP 4304 for supplying 3-Phase electrical power to all the target mechanisms.

FEATURES:

  • There is no wastage of time since there are two frames for holding targets.   While one of the targets is exposed to the shooters for firing the other could be brought down for recording and patch-up.

  • Brake-Motor facilitates quick movement of the target. 

  • Targets can be controlled individually or simultaneously. 

  • Target movement preceded by beeping sound to alert the personnel inside the butt. 

  • Targets are controlled from a location behind the shooters at a distance of more than 300 meters from the butt. Targets can also be controlled with the help of push buttons provided at the butt end.

In case of power failure the targets can be raised or lowered manually.

SPECIFICATIONS: 

  • POWER SUPPLY                     : 415V± 10%, 50Hz. 3-Phase 4 Wire Supply.

  • POWER CONSUMPTION          : Approximately 0.4 KW per target.

  • MOTOR                                    : 0.37 KW geared brake motor. 



 

LONG RANGE TARGETS TYPE SLR 4400

FOR SNAP SHOOTING PRACTICES WITH RIFLE

The Turning Targets of Combat Shooting Practice (Type TUT 2003) can also be used for the snap shooting matches of rifle for All India Police Duty Meet and other tournaments. For this the targets are modified to hold the snap shooting target sheet of 22-inch diameter. Depending upon requirement a set of 4,8, or 12 targets can be arranged in a row inside the butt end trench of a long range for different types of snap shooting practices. The complete set comprises of the following units.
 

TURNING TARGET TYPE TUT 2003

The Turning Target type TUT 2003 takes 90° turn from its REST position to present a full view to the shooter when a suitable control signal is given to the same. In the REST state the target mounted on the mechanism takes an EDGE ON position i.e. only the edge of the target is visible to the shooter. The mechanism is designed to hold 22-inch snap shooting target required for AIPDM or other tournaments. The complete unit with its mechanical gear and electrical control is made out of M.S. sections and sheets enclosed in weather proof housing.
 

LOCAL CONTROL UNIT TYPE  LCU 4473

The Local Control Unit type LCU 4473 is designed to control maximum four number turning targets of type TUT 2003. Depending upon the requirement 1, 2, or 3 No. LCU 4473 can be used for controlling the targets. The LCUs are to be mounted at the Butt End with cable connections for receiving 3-phase power supply and plug-in connections for supplying power and control signal to the targets.
 

PROGRAMMABLE CENTRAL CONTROL UNIT TYPE  PCCU 4462/4463

The Programmable Central Control Unit Type PCCU 4462 / 4463 is a portable control desk which can be installed at a suitable distance behind the shooters from where the match incharge can control the targets & issue the commands. The control desk comprises of various controls and programme switches for setting the timings and number of exposures of the target operation.
 

 POWER DISTRIBUTION PANEL TYPE  PDP 2080

The Power Distribution Panel type PDP 2080 supplies electrical power to all the LCUs. A single PDP 2080 can be used to supply power to maximum 4 No. LCUs.


SPECIFICATIONS 

  • POWER SUPPLY                     :  3-Phase 4-Wire 415V± 10% 50Hz. Mains

  • POWER CONSUMPTION          : Approximately 300VA per target.

  • TIMING CONTROL   : By means of latest CMOS Logic ensuring accuracy of timing with quartz oscillator. 

  • CENTRE TO CENTRE DISTANCE BETWEEN TARGETS : Adjustable.

 FEATURES

  • Robust Steel Frame

  • Lightweight geared motor in aluminium housing suitable for smooth & snappy action.

  • Vibration Free Turning

  • Weather-Proof outdoor type construction

  • Plug-in connections to ensure easy installation.

  • Accurate Timing

  • Flexibility in range layout.

Portable Targets   - easy to shift.  

 
 

Electrical Control Panels

   

Electronic Products

 

 

Sport Shooting Targets

TARGET FOR 10M AIR PISTOL & AIR RIFLE SHOOTING

TARGET FOR 25M PISTOL SHOOTING

TARGET FOR 50M PISTOL & RIFLE SHOOTING

TARGET FOR  PISTOL & REVOLVER SHOOTING IN AIPDM

MOTORIZED 4 X 4 MECHANISM FOR BIG-BORE SHOOTING

LONG RANG TARGETS FOR SNAP SHOOTING WITH RIFLE

 

Combat Shooting Targets